News >
Strong power performance: Weichai generators adopt advanced diesel engine technology, with excellent power curve design They can have a relatively small volume at the same power,.
Poor sealing between piston and cylinder liner: During low load operation, the sealing between the piston and cylinder liner deteriorates, causing oil to enter the combustion chamber and burn, resulting in blue smoke from the exhaust .
Reduced combustion efficiency: Low water temperature can lead to deterioration of diesel combustion conditions in the cylinder, poor fuel atomization, increased combustion period after ignition, .
Poor fuel atomization: When the fuel injection pressure is too low, carbon deposits are formed due to nozzle wear, the spring end face is worn, or the elasticity decreases,.
Insufficient oil level: If the oil level of the generator is insufficient, it is necessary to replenish the oil level in a timely manner When checking the oil level, it is best to check the oil level while in standby mode to.
Fuel type: Diesel can be classified into different grades such as 0, 10, -20, etc according to its freezing point Diesel with a lower freezing point is suitable for low-temperature environments, while diesel with a higher freezing.
Clean the outer surface of the unit to maintain a clean appearance Check if the speed control rod is flexible and lubricate all connection points .
Ensure that the water tank does not freeze: By adding specialized long-lasting rust and antifreeze or using electric heating equipment, ensure that the indoor temperature is above freezing point to prevent the water tank from freezing .
Choose the appropriate diesel: In low-temperature environments, the viscosity of diesel will increase, the flowability will deteriorate, which can easily lead to poor atomization and fuel supply interruption .
Connect the positive and negative poles: During charging, the positive and negative poles of the diesel generator battery should be connected to the positive and negative poles of the charger respectively,.
As a global provider of power products and solutions, Huaquan Power will bring new equipment and products to the exhibition, booth number 10-F05, booth time:.
Oil pump failure: The oil pump cannot provide sufficient oil pressure normally, which may be due to wear of the oil pump, damage to the oil pump drive gear, or bending of the oil pump shaft .
Weifang, shandong province, China 中国 山东。潍坊
Shandong Huaquan Power Co., Ltd.