News >
Poor fuel atomization: When the fuel injection pressure is too low, carbon deposits are formed due to nozzle wear, the spring end face is worn, or the elasticity decreases,.
03
2024-12
Insufficient oil level: If the oil level of the generator is insufficient, it is necessary to replenish the oil level in a timely manner When checking the oil level, it is best to check the oil level while in standby mode to.
25
2024-11
Fuel type: Diesel can be classified into different grades such as 0, 10, -20, etc according to its freezing point Diesel with a lower freezing point is suitable for low-temperature environments, while diesel with a higher freezing.
19
2024-11
Clean the outer surface of the unit to maintain a clean appearance Check if the speed control rod is flexible and lubricate all connection points .
15
2024-11
Ensure that the water tank does not freeze: By adding specialized long-lasting rust and antifreeze or using electric heating equipment, ensure that the indoor temperature is above freezing point to prevent the water tank from freezing .
11
2024-11
Weifang, shandong province, China 中国 山东。潍坊
Shandong Huaquan Power Co., Ltd.